Introduction To The Type Of Bottle Sterilizer
Jan 22, 2019
Leave a message
There is a traditional boiling method to disinfect, the principle is to boil the water to 100 ° C, through high temperature to sterilize the bottle. This disinfection method is suitable for disinfecting vessels with a high temperature resistance of 120 ° C or higher. The body of the pot is made of stainless steel, and the bottle is equipped with a basket for holding about 6 bottles.
How to use: First put the washed bottle in the basket, put it into the pot, then inject the water into the pot without the height of the bottle, and close the lid. Then put the bottle sterilizer in a gas stove or induction cooker and heat it for 10 minutes.
The use of 100 ° C high temperature steam sterilization bottles and small accessories, is currently the most widely used, the most thorough and effective disinfection method, the national tableware disinfection standards adopted this method, the disinfection standard of medical equipment is based on tableware disinfection standards Increased pressure and temperature in the disinfection environment. Such sterilizers have no strict requirements on the structure and light transmission of the sterilizing device, and are suitable for sterilizing children's bottles and tableware.
How to use: Inject 100ml of water into the evaporating dish, put the washed bottle into the sterilizer of the bottle sterilizer, put it into the sterilizer, then put it into the small basket, put the small parts such as the nipple Into it, cover it. After turning on the power, press the disinfection button and disinfection is completed after 15 minutes.
The bottle disinfected by steam sterilization, the bottle wall will be attached with a large number of water drops, the humid environment is easy to cause bacteria to breed, in order to improve the cleaning time of the bottle, these products add drying function based on the common steam bottle sterilizer. , also known as the drying bottle sterilizer.
How to use: Inject 100ml of water into the evaporating dish, put the washed bottle into the bottle sterilizer and put it into the sterilizer, then put it into the small basket and put the small parts such as the nipple into it. , cover it. After turning on the power, press the disinfection button, one button control, the steam sterilizer will automatically dry the bottle after disinfection.
4. Microwave bottle sterilizer
The microwave bottle sterilizer does not have any disinfection function by itself. It is actually a device for holding a bottle. It can also be called a bottle sterilization box. The bottle is sterilized by heating it in a microwave oven to generate water vapor.
How to use: First inject 200ml of water into the bottle sterilization box, put the washed bottle into it, cover the lid, then put the disinfection box into the center of the microwave tray, close the microwave oven, and wait for four minutes.
