How to overhaul the ultra high pressure homogenizer
Jun 13, 2019
Leave a message
| Faults | General cause | Solutions |
| There is a knocking sound in the gearbox | Wear of the connecting rod bushing, loosening of the connecting rod bolt, leakage of the upper valve | Replace, tighten, overhaul |
| Crankshaft bearing heating | Bearing damage There are debris in the bearing Bad bearing assembly | Replace, inspect, clean, reassemble |
| Slider heating | There is debris in the sliding plate and the working surface of the box, and the bearing is poorly assembled. | Disassemble, inspect, clean |
| Motor heating | Electrical damage, room temperature is too high | Check, repair, take measures, reduce room temperature |