Constant Temperature And Humidity Incubator Daily Maintenance Method

The constant temperature and humidity incubator is widely used in sterility tests, stability tests such as medicine, tissue and food processing, as well as raw material properties and product packaging life of industrial products.

1. When the constant temperature and humidity incubator completes the low temperature operation, the temperature is dried at 60 ° C for about 30 minutes before opening the door to avoid affecting the measurement time in the subsequent test or causing the evaporator to freeze.

2. When operating in a constant temperature and humidity incubator, please do not open the constant temperature and humidity chamber door unless you have to open it, as long as it is necessary, otherwise it may cause the following adverse consequences:

(1) The inside of the door is still kept at a high temperature.

(2) High temperature air may trigger a fire alarm and cause a mistake.

(3) High temperature moisture is flushed out of the box.

(4) During the experiment, the switch box has certain damage to the compressor. Unless the test requires, the customer is not recommended to switch frequently during the experiment.

3. When the cabinet is in operation, please do not touch it with your hand to avoid electric shock or injury from the fan.

4, the installation position of the wet ball gauze must be accurate, in order to measure the correct relative humidity.