High Speed Disperser Dissolver Mixer Machine for Paint, Inks

    Product Introduction

This machine can dissolve, disperse and mix materials with different viscosity.
Through the very high peripheral tip speed of the toothed disc, the strong shearing, crashing-
and friction forces generated, which will mix the materials efficiently.
The large stress forces break down the agglomerates into the liquid or paste suspension.
This machine is suitable to use in industrial fields for pre-mixing liquids, it disperses and dissolves materials to smaller particle size efficiently.

Main Technical Parameters

Model	XHF－DY
Power Supply	220V/50Hz
Power	360W
Adjustable range	2800-28000rpm/min
Capacity	3ml-1000ml
Timing Range	1-9.9min
Ambient Temperature	-10OC-40OC
The size of blade	Φ10mm processing volume:3-200ml; Φ14mm processing volume:100-500ml; Φ18mm processing volume:50-1000ml
Display	LCD
The weight of the model	6.0Kg
External dimensions	320×220×430mm
Net Weight	8Kg
Packing Size	360*300*560mm

The high-speed disperser is a general-purpose equipment for mixing, and problems may occur during use.

1. The oil cylinder is sealed with oil leakage. After purchasing new equipment, all parts of the lubrication work should be done to extend the service life of the oil seal.

2. The speed regulator pottery failure condition, because the equipment production belongs to the chemical industry, often contact with the solvent, and then the speed-regulating potentiometer itself is also a wearing part, because the adjustment force in the mediation process will affect the service life, pay attention to the adjustment Light and gentle.

3. Inverter and motor, these two main need to observe whether the input power is correct, regularly measure the input and output current.

4. Disperse the spindle bearing. Normally use no noise. Generally, no need to add lubricating oil. If you need to add it, please add less or replace the new bearing. Do not overload or run at low speed for a long time, which will affect the service life of the equipment.