Maintenance of constant temperature water bath tank

A: Inject a proper amount of clean tap water into the workshop tank and place the container.

B: Power up.

C: Select thermostat temperature: The temperature "set-measurement" selector switch to "set", adjust the temperature control knob, digital display the desired set temperature. The temperature "set-measure" selector switch is dialed to "measurement" where the actual temperature of the working water tank is displayed. (The red light is on, indicating the heater works).

D: Work finished, put the thermostat knob in the minimum value, cut off the power.

E: If the water bath pot is not used for a long time, the water in the studio should be excluded, clean and dry with a soft cloth.

F: It is forbidden to use the heater without water in the water bath pan.