Cleaning semiconductor wafers cleaner

Main Technical Parameters:

Notice :With the heating function of the ultrasonic cleaner, after heating the temperature than the actual display temperature 2-8 ^OC for thermostatic ultrasonic , optional ultrasonic thermostatic ultrasonic cleaner .

The parts of the ultrasonic cleaner

     The ultrasonic cleaning machine is mainly composed of an ultrasonic cleaning tank and an ultrasonic generator. The ultrasonic cleaning tank is made of high-quality stainless steel with strong elasticity and corrosion resistance. The ultrasonic transducer vibrator is installed at the bottom; the ultrasonic generator generates high-frequency high-voltage, which is transmitted to the transducer through the cable coupling line, and the transducer is combined with the vibration plate. The high frequency resonance is generated, so that the solvent in the cleaning tank is subjected to ultrasonic waves to wash the dirt.

What are the precautions for using the ultrasonic cleaner?

First, pay attention to the use of cleaning fluid

     When using the ultrasonic cleaning machine, it must be operated in the order required by the specifications. In particular, it is not possible to turn on the cleaning liquid before pouring it. This is a violation of the regulations, which may cause serious consequences or even damage the machine. Therefore, be sure to first Put the liquid in and then turn the switch on. At the same time, the manufacturer of the ultrasonic cleaning machine should also pay attention to the composition of the cleaning liquid. If it contains liquid of flammable nature, it must be completed in a short time, and all the people must be supervised and cannot leave the scene.

Second, pay attention to the use of corrosion or volatile cleaning solution to do special treatment

     Under normal circumstances, the use of hazardous cleaning fluids is not recommended, but if the situation is special, it is emphasized that ultrasonic cleaner manufacturers must use corrosive or volatile liquids, then indirect methods should be used for proper disposal. Ultrasonic cleaning machine manufacturers introduced the specific operation method is to add water first in the cleaning tank, and then use another container to install the cleaning liquid and put the items to be cleaned, and then they are immersed in the water in the cleaning tank, in this way Cleaning will also have the same effect, and it can also ensure safety.

Third, pay attention to control the relevant factors of cleaning

      Ultrasonic cleaning machine manufacturers recommend not to put the things that need to be cleaned at the bottom, you should use a special cleaning bracket to carry the overhead position in the middle, so that you can get a good cleaning effect even when you eat. . At the same time, the high-end ultrasonic cleaning machine manufacturers also reminded that the energy of the cleaning liquid should be controlled well. If it is too small, it may damage the instrument or cause malfunction.

Hot Tags: Cleaning semiconductor wafers cleaner, China, factory, suppliers, wholesale, customized, buy, cheap, bulk, price list, for sale