Contact Us
TEL: +86-574-88350013
Mob: +8613003752008
E-mail: info@scientz.com
Address: No.65, Mujin Road, National Hi-Tech Park, Ningbo, Zhejiang, China
Laboratory General Purpose Power Ajustable Touch Display Ultrasonic Soicoatr Mixer

Laboratory General Purpose Power Ajustable Touch Display Ultrasonic Soicoatr Mixer

Scientz-08 INDUSTRIAL ULTRASONIC HOMOGENIZER OF MANUFACTURE  Industrial type ultrasonic homogenizer is a new equipment for R & D on the basis of experiment by Ningbo Scientz, in order to adapt to the preparation of nano materials and strengthen the ultrasonic cleaning, fungus treatment, for test in factory etc. The big power grinder was designed for manufacturer. The control circuit adopts microcomputer, arbitrary control functions, with overload protection, the display device is ultra clear and bright, It is the most ideal of crushing equipment for manufacturing enterprises.

Scientz-08

INDUSTRIAL ULTRASONIC HOMOGENIZER OF MANUFACTURE 

Industrial type ultrasonic homogenizer is a new equipment for R & D on the basis of experiment by Ningbo Scientz, in order to adapt to the preparation of nano materials and strengthen the ultrasonic cleaning, fungus treatment, for test in factory etc. The big power grinder was designed for manufacturer. The control circuit adopts microcomputer, arbitrary control functions, with overload protection, the display device is ultra clear and bright, It is the most ideal of crushing equipment for manufacturing enterprises. 

 

Main Technical Parameters:

Power Supply

220V、50KHZ 

Frequency

15KHZ

Ultrasonic Power

2400W

Time setting

(1Ultrasonic time setting:0.5-99S(2)Gap time setting:0.5-99S(3)Total time:0.1-99min

Duty Ratio

0.5%-99.5%

Tip size

38MM

Display

Pointer/Digital tube

It is optional to buy coolant circulation system

 

Tip size choosing for your reference

The size of Tip

Frequency

Amplitude

Power Range

  Processing Volume

Φ2

1/12"

20-25KHz

300um

20-250W

0.5-5ml

Φ3

1/8"

20-25KHz

250um

30-400W

3-10ml

Φ6

1/4"

20-25KHz

220um

60-650W

10-100ml

Φ10

5/12"

20-25KHz/19.5-20.5KHz

150um

100-950W

100-200ml

Φ12

1/2"

20-25KHz

150um

100-950W

100-200ml

Φ15

5/8"

20-25KHz/19.5-20.5KHz

145um

200-950W

200-500ml

Φ18

3/4"

20-25KHz

100um

200-950W

200-500ml

Φ20

3/4"

19.5-20.5KHz

60um

400-1200W

500-1000ml

Φ25

1"

19.5-20.5KHz

40um

800-1800W

500-1200ml

 

07b5e0320494d7d8cf2407f4b246e54c.jpg


When does the ultrasonic cell pulverizer change the "tip" head?


Ultrasonic cell shredder replaceable "tip" heads are often used in high energy applications where wear can occur. When energy is transferred through the "tip" head, corrosion can occur where the metal surface leaves a mark. Over time, a slight erosion spot will occur where corrosion occurs. The “tip” head can be sanded with gauze or gauze unless it is damaged to a certain extent; when this happens, the “tip” head will be difficult to tune the frequency, instead it may be a long, sharp noise, Zui Cracks eventually form. Since the price of the "tip" head is relatively cheap, we recommend that if there is a problem after the second polishing, it will be replaced.


Operating hours

Ultrasonic continuous working time should not exceed 5 seconds at a time, and the working gap time should be greater than or equal to the ultrasonic time to facilitate heat dissipation. The time setting should be based on the principle that the ultrasonic time is short and the number of ultrasound times is large, which can prolong the life of the ultrasonic cell disruptor and the ultrasonic probe.





Inquiry