Contact Us
TEL: +86-574-88350013
Mob: +8613003752008
E-mail: info@scientz.com
Address: No.65, Mujin Road, National Hi-Tech Park, Ningbo, Zhejiang, China
Washing machine manufacturer

Washing machine manufacturer

D Series Ultrasonic cleaning machine ● Digital display and setting ultrasonic cleaning time ● Display woking countdown time ● Timing range: 1-600 minutes adjustable ● Equipped with a special stainless steel basket, reduce sound cover ● The shell and cover are made by stainless steel ● The...

D Series Ultrasonic cleaning machine 

● Digital display and setting ultrasonic cleaning time

● Display woking countdown time

● Timing range: 1-600 minutes adjustable

● Equipped with a special stainless steel basket, reduce sound cover

● The shell and cover are made by stainless steel

● The equipment controlled by Single-chip controller

● The lastest working parameters can be stored in memory after power-off

D系列清洗机参数_proc.jpg

The common dirt on the zero and parts of diesel locomotives is mainly oil, carbon deposit, scale, rust, dust and so on. The cleaning should be based on zero, the shape of the parts, the size of the parts, the dirt composition, the dirt on the diesel locomotive, and the common dirt on the parts are mainly oil, carbon, scale, rust, dust and so on.


When cleaning, the effective cleaning method should be reasonably selected according to the shape of the part, the shape of the part, the size of the dirt, the degree of contamination, the material of the part, the precision of the surface processing and the size of the batch. The correct cleaning method not only ensures the cleaning quality and high cleaning efficiency, but also reduces the cleaning cost.


Mechanical cleaning


1.    Manual removal method Manual method? Use metal brushes, scrapers and other tools to remove dirt on the surface of parts and parts. The method also includes wiping the surface of the parts with cotton, silk, synthetic fibers and suede to remove dirt.


2.    Machine tool cleaning method Use electric or pneumatic tools to drive metal brushes, soft grinding wheels, etc. to remove carbon, rust, paint and so on.


3.    Compressed air purging method Use compressed air to purify dry dust, sludge, etc. covering the surface of the parts and components.


High pressure water washing


 Dipping, boiling and washing;


   Dipping and boiling are a relatively primitive cleaning method. Dipping is to immerse the parts and parts to be cleaned in the cleaning liquid and rely on the physical and chemical reactions between the cleaning liquid and the dirt to gradually soften the dirt, and gradually turn the looseness into a strolling state, eventually falling off from the surface of the part. Go on.


   Dipping cleaning time is also relatively inefficient. However, it has the advantages of simple cleaning equipment and less labor required, but it has been widely used.


   Cooking is a cleaning method that heats the cleaning solution until it boils. The cleaning performance is further improved during the heating process. At the same time, the oil and grease also soften or melt with the increase of temperature, and the cleaning liquid is heated and then convected up and down to make the dirt easy to be washed from the cleaning member.


   The efficiency of cooking is higher than that of dipping. The cleaning equipment used for dipping and boiling mainly includes a washing tank and a heating system.

.



Hot Tags: Washing machine manufacturer, China, factory, suppliers, wholesale, customized, buy, cheap, bulk, price list, for sale
Inquiry