Contact Us
TEL: +86-574-88350013
Mob: +8613003752008
E-mail: info@scientz.com
Address: No.65, Mujin Road, National Hi-Tech Park, Ningbo, Zhejiang, China
Vertical Rotary Evaporator With Vacuum Pump

Vertical Rotary Evaporator With Vacuum Pump

Main unit: seesaw button automatic lifting 0-150 mm Vacuum display: When the vacuum is low, the valve is closed to maintain the vacuum display inside the steaming, reducing laboratory noise and prolonging the service life of the vacuum pump. Evaporation capacity: Max.27ml/min Speed: digital...


Main unit: seesaw button automatic lifting 0-150 mm


Vacuum display: When the vacuum is low, the valve is closed to maintain the vacuum display inside the steaming, reducing laboratory noise and prolonging the service life of the vacuum pump.


Evaporation capacity: Max.27ml/min


Speed: digital display / positive / reverse speed 0-310 rev / min; power 40W


Heating pot: One-time forming Teflon compound pot φ23×13cm fully enclosed heater power 1.4KW


Temperature: automatic temperature control, digital display Water bath: room temperature -99 degrees ± 1 ° C; oil bath: room temperature - 180 degrees ± 3 ° C;


Cooler: vertical, ball mill condensate tube cooling area 0.25m2


 Vertical, standard port condensing tube cooling area 0.25m2


Feeder: Valve type feeding tube is sleeved with PTFE tube and water retaining ring


Sealing ring: fluoro rubber + PTEF imported material combination vacuum sealing gasket


Capacity range: 0.25--2L


Total power: 1.5kw, input voltage ~220v/50Hz


Volume/weight: Outer size (length × width × height) 71 × 46.5 × 51cm Gross weight 30KG


Instrument size: (length × width × height) 66 × 42 × 83cm


Factory standard


S35 ball grinding port collection bottle 2L1 24# standard port rotating bottle 1L, 2L each 1


24# standard mouth collection bottle 2L1 24# standard mouth rotating bottle 1L, 2L each 1



Rotary evaporator maintenance instructions


1. Check the instrument carefully before use. Whether the glass bottle is damaged or not, and whether the interfaces are consistent, pay attention to light handling.


2. Wipe each interface with a soft cloth (can be replaced with a napkin) and apply a small amount of vacuum grease. The vacuum grease must be covered after use to prevent the entry of lime sand.


3. The interfaces should not be tightened too tightly. It should be loosened regularly to avoid long-term tight locking and cause the connector to bite.


4, first turn on the power switch, then let the machine run from slow to fast, stop the machine when the machine is stopped, then turn off the switch


Welcome to buy our quality and cheap vertical rotary evaporator with vacuum pump for sale in bulk. As one of the leading Rotary Evaporator suppliers in China, we also welcome wholesale orders and customized orders. Now, please be free to check the price list with our factory.
Hot Tags: vertical rotary evaporator with vacuum pump, China, factory, suppliers, wholesale, customized, buy, cheap, bulk, price list, for sale
Inquiry